Hanmero Cementitious Skim Coat Render FR is a fast-setting pre-blended mix of polymer and fiber reinforced (FR) cement, designed for use as a basecoat and skim coat without needing any further additives to deliver a 2mm thick coating direct to ALC (Autoclaved Lightweight Concrete)/AAC (Autoclaved Aerated Concrete) substrates. It is suitable for both interior and exterior use.
SUBSTRATE SELECTION GUIDE
| Substrate Type | Hanmero Skim Coat Render FR |
| Masonry, pre-concrete | √ |
| Brickworks, blockworks | √ |
| AAC/ALC panels & blocks | √ |
| Expanded Polystyrene (EPS) | × |
| Extruded Polystyrene (XPS) | × |
| Off-form Concrete | × |
| Slate edge, permanent framework | × |
| Fiber Cement Sheeting | × |
Note: Painted, non-stable masonry, sealed or glazed, glass, and grease/silicon contaminated surfaces are not suitable for rendering.
THICKNESS & COVERAGE
| Render Thickness | |
| Min | 2mm |
| Max | 4mm |
| Coverage | |
| ㎡/bag | kg/㎡ |
| 2.9-5.8㎡/bag** | 1.7kg/㎡/mm |
** Hanmero Render FR comes in 20kg bag size.
MIXING GUIDE
Mix Ratio below makes approx. 15L of wet Hanmero FR mixture.
| Render bag | Clean water |
| 20kg Hanmero Render FR | 4.5L |
Allow mixture to stand for 3-5 minutes before application. To remix and adjust consistency, add 0.5L water to mixture, as required.
Hanmero Render FR has a shelf life of 12 months if stored in dry enclosed conditions in unopened packaging. Store away from foodstuffs. Store away from sources of heat and/or ignition. Store locked up. Keep container standing upright. Keep containers closed when not in use - check regularly for spills.
As a trusted product used by builders and tradesmen alike, you know you can trust this product to stand up to all your project requirements.
